Quick Answer
Repointing a chimney in the UK typically costs between £300 and £1,200, depending on the stack size and how much brickwork needs work. Scaffolding or access can add £300 to £1,000, and extra repairs such as flaunching, pots or flashing add to the total. Prices vary by region and chimney condition, so get a written quote that says exactly what is included.
Chimney repointing is one of the most common repair jobs on older UK homes, and one of the easiest to put off. The mortar between the bricks wears away over years of rain, frost and wind, and a chimney stack takes more weather than any other part of the house.
In this guide, we break down How Much Does It Cost to Repoint a Chimney, what pushes the price up or down, how the work is done, and when it makes sense to repair rather than rebuild.
Average cost of repointing a chimney
The average cost to repoint a chimney in the UK is around £500 to £800 for a typical single stack. Most homeowners pay between £300 and £1,200 depending on the size of the stack and the state of the brickwork. A small stack with one flue sits at the lower end, while a large stack with several flues costs more because more brickwork needs raking out and repointing at height.
Scaffolding is often the biggest extra. If access is not already in place, it can add £300 to £1,000 to the final bill. Prices also vary by region, with London and the South East usually costing more than the North and Midlands. Treat these figures as a guide, not a quote.
What is Chimney Repointing Cost by Job Type
Chimney work rarely stops at repointing alone. The table below shows typical UK prices for the most common jobs.
| Job | Typical UK Cost | Notes |
|---|---|---|
| Repointing a small stack (one flue) | £300 to £600 | Labour and materials, with access already in place |
| Repointing a large stack (several flues) | £600 to £1,200 | More brickwork and more time at height |
| Scaffolding or access tower | £300 to £1,000 | Depends on roof height and the number of sides |
| Replacing flaunching | £150 to £400 | The mortar bed around the base of the pots |
| Rebedding chimney pots | £50 to £150 per pot | Usually done alongside repointing |
| Replacing lead flashing | £150 to £450 | Seals the join between the stack and the roof |
| Partial rebuild of a stack | £800 to £2,500 | For crumbling or leaning brickwork |
Always check what a quote includes. A price that leaves out scaffolding or doesn’t mention flashing and flaunching may look cheap, then increase once the work starts.
How Much Do Materials Cost for Chimney Repointing?
Materials make up the smaller part of the bill. For a standard stack, mortar usually costs between £20 and £60, which is why the labor and access costs matter far more than the materials themselves.
| Material | Typical UK Cost | Notes |
|---|---|---|
| Repointing mortar (lime or sand and cement mix) | £20 to £60 | Enough for a small to medium stack |
| Flaunching mortar | £10 to £30 | Used to bed and seal the pots |
| Chimney pots (if replacing) | £20 to £80 each | Price depends on size and style |
| Lead flashing | £50 to £150 | Cost depends on the length needed |
The mortar type matters. Older homes built with soft bricks or lime mortar need a matching lime mix, because hard cement can trap moisture and damage the brick over time. Lime mortar costs a little more, but it protects the stack and lasts longer on period properties.
How Much Does Chimney Repointing Labour Cost?
Labor is the largest part of the price, often 60% to 70% of the total once access is in place. Most roofers and bricklayers charge between £150 and £250 per day, and many quote a fixed price for the whole job instead.
A small single-flue stack usually takes one day. A large stack with several flues can take two days or more, especially if the work includes flaunching, pots or flashing. Working at height is slower and needs more safety measures, which is why chimney work costs more per hour than similar brickwork at ground level.
To keep labour costs fair, ask for a written quote that lists the number of days, the work included, and whether scaffolding is part of the price.
What Affects the Cost of Chimney Repointing?
Two chimneys that look the same from the street can cost very different amounts. These are the main factors:
Height and Access
A tall stack, or one on a steep or awkward roof, needs more scaffolding and more time. Scaffolding alone can add £300 to £1,000, so it is often the biggest single extra on the bill.
Size of the Stack
More faces, more flues, and more brickwork mean more mortar to rake out and replace. A large stack with several flues can take two days or more, while a small single-flue stack is usually done in one.
Condition of the Brickwork
Cracked, loose, or flaking bricks need replacing, which adds to the bill. If the damage is severe, a partial rebuild may be cheaper long term than repeated repairs.
Type of Mortar
Older homes often need a soft lime mortar, which costs more than a standard cement mix but protects old brick. Using hard cement on soft bricks can trap moisture and cause the bricks to crack over time.
Extra Repairs
Flashing, pots, and cappings are often fixed during the same visit. Doing everything at once is usually cheaper than booking separate visits, because the scaffolding is already up.
Location
Labour rates differ across the UK, and the South East and East of England are often above average. Getting two or three local quotes is the best way to see what a fair price looks like in your area.
Scaffolding and Access Costs
Working on a chimney means working at height, and a ladder alone is rarely safe for this kind of job. Most roofers use a scaffold tower or a section of scaffolding, which is often the largest single line on the quote. If the roofer is also fixing the roof, gutters, or fascias, they can share the scaffold across the work, which lowers the cost of each job. Ask whether scaffolding is included before you accept a price.
Signs Your Chimney Needs Repointing
Catching the problem early keeps repairs small. Look at the chimney from the ground, using binoculars if you have them, for:
- Crumbling, sandy or missing mortar between the bricks
- Loose bricks, cracked or flaking
- Mortar debris on the roof, in the gutters or in the garden
- Damp patches or staining on the chimney breast inside
- White salt deposits on the brickwork
- A stack that leans or looks uneven
- Moss or plant growth in the joints

Repointing vs Rebuilding a Chimney
Repointing is enough when the bricks are sound, and only the mortar has failed. If bricks are crumbling, the stack leans, or the structure has moved, repointing only covers up the problem, and a partial or full rebuild is the safer choice. A rebuild costs more, but it is cheaper than a stack that fails in a storm and damages the roof below. Chimney repairs often uncover other roof defects too
Can You Repoint a Chimney Yourself?
In theory, yes. In practice, it is rarely a good idea. A chimney stack sits at the highest and most exposed point of the roof, so the risk of a fall is high, and the Health and Safety Executive’s guidance on work at height explains why. A poor mortar mix or a rushed job can also let water into the chimney breast and cause damp inside the house, leaving you to pay twice.
When to call a Roofing Specialist
Some chimney checks are fine to do yourself, but repair work belongs with a trained roofer. The right call depends on how far the damage has gone.
- Check the stack from the ground with binoculars
- Keep gutters and the roof edge clear of mortar debris
- Note any damp patches on the chimney breast inside
Leave anything involving climbing onto the roof, replacing mortar, or handling flashing to a professional. A roofer can also check the pots, flaunching, and flashing in the same visit, saving a second call-out.
At Bestway Roofing – Chelmsford Roofing, we provide professional chimney repair services for homes across Chelmsford, Braintree, Long Melford and the surrounding areas. Our certified, fully insured team has more than 30 years of experience, and we’ll clearly tell you whether your chimney needs repointing, repair, or a rebuild.
Not sure what your chimney needs? Get a free, no-obligation quote from our team today, and we’ll tell you exactly what work is required.
FAQs
How long does chimney repointing last?
Good repointing can last 20 to 30 years, depending on the mortar, how exposed the stack is, and the weather it faces. Exposed chimneys are worth checking every few years.
How long does it take to repoint a chimney?
A small stack usually takes one day. A larger stack, or one that needs extra repairs, can take two to three days, plus time to put up the scaffolding.
Do I need scaffolding to repoint a chimney?
In most cases, yes. Scaffolding or an access tower provides a safe working platform and lets the roofer properly repair the pots, flaunching, and flashing.
Is chimney repointing covered by home insurance?
Standard policies generally do not cover gradual wear and tear, such as crumbling mortar. They may cover sudden storm damage, so check your policy wording.

