What Is a DPC in Construction? Types, Purpose and How It Works

What Is a DPC in Construction

Quick Answer: A DPC (damp-proof course) is a waterproof barrier built into a wall, usually at least 150 mm above ground level, to stop moisture rising from the ground into the brickwork. It is typically made of bitumen felt, plastic, slate, engineering brick or a chemical injection. Without a working DPC, rising damp can cause damp patches, peeling plaster, salt stains and rot. If a DPC fails or was never installed, a specialist can add a new chemical DPC.

If you have ever been told your house needs a new DPC, or seen the term on a survey, you may have wondered what it means. A DPC is one of the simplest and most important parts of a building, yet most homeowners never see it.

This guide explains what a DPC is in construction, why it matters, the different types, how it works, and what to do when it fails.

What Is a DPC in Construction?

DPC stands for damp-proof course. It is a layer of waterproof material built into a wall, just above ground level, that stops water from travelling up through the brick and mortar. Bricks and mortar are porous, so without a barrier they act like a sponge and draw groundwater upwards by capillary action.

A DPC is not the same as a damp-proof membrane (DPM). A DPC sits in walls, while a DPM is a sheet laid under or within floors to block moisture from the ground. Vertical DPCs are also used around windows and doors to stop water reaching the inner wall.

Why Is a DPC Important?

A working DPC protects both the building and the people living in it.

  • Protects the structure: It stops moisture reaching timber floors, joists and skirting boards, where it can cause rot.
  • Keeps interiors dry: It prevents damp patches, peeling paint and salt-stained plaster.
  • Protects health: Damp encourages mould, which can aggravate asthma and other breathing problems.
  • Protects property value: Buyers and surveyors look for signs of damp, and a failed DPC can hold up a sale.

Where Is a DPC Placed?

In most UK homes, the DPC sits in a mortar joint at least 150 mm above the outside ground level and runs across the full thickness of the wall. Keeping it above ground matters because soil, paving, or a raised flower bed built higher than the DPC lets moisture bypass it. This is known as bridging. Approved Document C of the Building Regulations covers how buildings should resist moisture from the ground.

What are the Types of DPC

Different materials have been used over the years, and the one in your wall depends largely on when the house was built.

Bituminous Felt

Common in homes from the early 20th century. It is flexible and cheap, but it can tear or degrade with age. Once the felt breaks down, moisture can start rising through the wall again, so older felt DPCs often need checking.

Slate

Typically found in Victorian and Edwardian homes. It is long-lasting and often laid in two courses, with staggered joints and a mortar bed. This double layer makes it highly resistant to rising damp, and it rarely fails unless the wall itself moves.

Engineering Brick

Used in older and some modern masonry. These are dense, low-absorption bricks laid in courses, so water struggles to pass through them. They are often used at the base of walls and in damp-prone areas, adding strength and moisture protection.

Polythene or Plastic

Used in most homes built since the mid-20th century. It is flexible, durable and widely used today, and it is laid as a continuous sheet within a mortar joint. It is easy to install and affordable, which is why it is the standard choice in modern construction.

Lead or Copper

Found in specialist and heritage buildings. Both are long-lived, but more expensive. They are used where a traditional, long-lasting finish matters, and they suit historic properties that need careful, high-quality materials.

Chemical Injection

Used for retrofits where a DPC has failed or is missing. A cream or fluid is injected into a mortar line through small drilled holes, forming a water-repellent barrier inside the wall. It is far less disruptive than cutting out a physical DPC, which makes it the most practical fix for existing homes.

Homes built before the late 1800s may not have a DPC at all. Many older solid-wall properties rely on thick walls and breathable lime materials instead, so they need careful treatment.

Comparing DPC Types by Cost and Durability

TypeRelative CostTypical Lifespan
Bituminous feltLow20 to 50 years
SlateMedium to high100+ years
Engineering brickMedium100+ years
Polyethene or plasticLow50 to 100 years
Lead or copperHigh100+ years
Chemical injectionLow to medium20 to 40 years

Costs and lifespans vary by property, access, and contractor, so these figures are a general guide rather than a quote.

How Does a DPC Work?

A DPC interrupts the path water takes through the wall. Groundwater moves upward through the tiny pores in brick and mortar. A DPC is made of a material that does not absorb water, so the moisture cannot cross it. A chemical DPC works differently: the injected cream or fluid soaks into the mortar and lines the pores with a water-repellent layer, which creates a barrier inside the wall.

What are the Warning Signs of a Failed DPC

When a DPC stops working, the damp usually shows on the lower part of the wall first. Look out for:

  • A horizontal tide mark on the lower part of the wall
  • Peeling paint or blown plaster near the floor
  • White, powdery salt deposits on the plaster
  • Damp, rotting skirting boards
  • A musty smell that does not go away

These signs can also come from other problems, such as condensation or leaking gutters, so a proper survey matters, and a damp meter alone can give false readings. Overflowing gutters in particular can mimic a failed DPC. Our guide explains why gutters overflow even after cleaning.

Repairing or Replacing a DPC

If a DPC has failed in a brick wall, the usual fix is to inject a chemical DPC into the mortar course. A specialist drills holes along a mortar line, injects the cream or fluid, strips off damaged plaster and replasters with a salt-resistant render. Before any work starts, a good damp proofing specialist will check for other sources of damp, because fixing a gutter or lowering ground levels is cheaper and sometimes solves the whole problem.

When to call a Roofing Specialist

Some damp jobs suit a confident DIYer, while diagnosing and repairing a DPC does not. The right call depends on the cause and how widespread the damp is.

  • Clear gutters and downpipes
  • Keep soil, paving and decking below the DPC level
  • Improve ventilation and use a dehumidifier

Injecting or replacing a DPC needs the right equipment and the right diagnosis, and a wrong guess means the damp comes back.

At Bestway Roofing – Chelmsford Roofing, we provide professional damp proofing services for homes across Chelmsford, Braintree, Long Melford and the surrounding areas. Our certified and fully insured team will find the real cause of the damp before recommending any work.

Not sure whether your DPC has failed? Contact us today for a free, no-obligation quote.

FAQs

Do all houses have a DPC?

No. Most homes built after the early 1900s have one, but many older solid-wall properties do not, and some have a DPC that has since failed.

How high should a DPC be above the ground?

In most cases, at least 150 mm above the outside ground level, so that splashing rain and soil cannot bridge it.

How long does a DPC last?

A plastic or slate DPC can last as long as the building. Bitumen felt can fail after several decades, and a chemical DPC often lasts around 20 years or more.

One thought on “What Is a DPC in Construction? Types, Purpose and How It Works”

  1. Pingback: Why Do Gutters Overflow Even After Cleaning?

Comments are closed.